| 模具控温机系列 | | | | | | | | | |
| 特 点 : | A. 提高成型效率: | | | | | | | |
| 1. 成型前,TMC自动控制模温,迅速达到所需的温度且始终保持恒温,减少模具预热所需之工时. |
| 2. 可持续操作而无模具温度过高之虑,而途中停机也不致因模具温度降低而需等待升温, | |
| 因此可提高生产效率. | | | | | | | |
| B. 提高产品品质: | | | | | | | |
| 1. 塑料有热胀冷缩的物理特性,因此若模温不稳定或控制不当,会产生成型品夹水纹,缩水, | |
| 扭曲,变形及表面光泽不良等现象,而使用TMC机型即可解决此类问题. | | |
| 2. 能促使模具保持适当的温度,大幅减少试模次数及降低成型品不良率,确保产品品质. | |
| C. 结构特性 | | | | | | | | |
| 1、可根据需要任意选择以水或热媒油当传热介质. | | | | |
| 2、选择配备的PID智能型自动演算的温度控制器，能准确显示和控制模具温差所需温度±1℃内. |
| 3、两段式加热结构设计，可视所需之温度增减电力，并配合特殊之发热构造，可省时省电。 |
| MOULD TEMPERATUER CONTROLLE SERIES | | | | | | |
| FEATURES : | A. IMPROVEMENT IN INJECTION MOLDING EFFICIENCY: | | | | |
| 1. The TMC series can control the temperature of the molds automatically, and reach |
| a requested temperature and remain at the level at all times before the mold |
| forming.So the labor and time which are used to pre-heating molds can be reduced. |
| 2. Sustainable operation and no worry of over-heating. Even the drop of temperature |
| caused by a stop in the process doesn’t need to wait to be increased.So the |
| produce efficiency is promoted. | | | | | |
| B. IMPROVEMENT IN INJECTION MOLDING QUALITY: | | | | |
| 1. Accurate mold temperatue gives even plastic flow patterns,reducing flow&weld lines, |
| helping retain gloss appearance,eliminating sink marks,silver streaking,and |
| delaminating,warping etc… | | | | | | |
| 2. Steady controlled temperatures make your plastic moldings accurate in size& |
| consistent in quality. | | | | | | |
| C.FEATURES OF THE UNITS: | | | | | | | |
| 1. Either water or oil can be used as medium according to the requests. | |
| 2. Optional pid tenperature controllers are used for accurate control of | |
| temperature within±1℃. | | | | | | |
| 3. Two-step heating design can control the power according to the requests. And it |
| also works with a special heating structure so as to save time and power. |
| 模具控温机系列规格表Specifications of mould temperature controllers series | |
型号/MODEL | TMC-60 | TMC-90 | TMC-120 | TMC-240 | TMC-360 | TMC-60W | TMC-90W | TMC-120W | TMC-240W | TMC-360W |
温度范围TemperatureRange | 油(oil):45℃-160℃(Normal)-199℃(H) | 水(Water):35℃-99℃(Normal)-120℃(H) |
传热媒介HeatimgMedium | 油(oil | 水(Water) |
媒价容量TankCapcity | 8L | 8L | 12L | 18L | 22L | 8L | 8L | 12L | 22L | 22L |
泵浦功率PumpPower | 1/2HP | 1/2HP | 1HP | 2HP | 3HP | 1/2HP | 1/2HP | 1HP | 2HP | 3HP |
泵浦压力PumpPressure | 2.2 | 2.2 | 2.5 | 3 | 3.7 | 2.2 | 2.2 | 2.5 | 3 | 3.7 |
电热功率
Heater | 6 | 9 | 12 | 24 | 36 | 6 | 9 | 12 | 24 | 36 |
冷却方式CoolingType | 间接冷却 | 间接冷却 |
模具出入口Moldinlet&outlet | 3/8"*2 | 3/8"*4 | 3/8"*4 | 1"*1 | 1.5"*1 | 3/8"*2 | 3/8"*4 | 3/8"*4 | 1"*1 | 1.5"*1 |
冷却出入口CoolingWaterInlet | 1/2" | 1/2" | 1/2" | 3/4" | 34" | 1/2" | 1/2" | 1/2" | 3/4" | 34" |
外型尺寸Dimensions | 580*300*550 | 680*350*650 | 700*450*650 | 800*750*560 | 580*300*550 | 680*350*650 | 700*480*650 | 800*750*560 |
重量
Approx.Weight | 50KG | 52KG | 65KG | 75KG | 85KG | 50KG | 52KG | 60KG | 65KG | 70KG |
| 产品规格若有改变，恕不另行通知。 We reserve the right to change specif ations without prior notic | |
点击图片查看大图
产品分类