点击图片查看大图
| 两机一体模温机系列 | ||||||||
| 特点: | 1. 本机具有两套温度控制系统,可同时控制有不同温度要求的前后模. | |||||||
| 2. 本机可根据需要任意选择以水或热媒油,或同时选择油和水,作为传热介质. | ||||||||
| 3. 本机配备PID智能型自动演用的温度控制器,能准确显示和控制模具温差于所需温度±1℃内. | ||||||||
| 4. 两段式加热结构设计,可视所需之温度增减电力,并配合特殊之发热构造,可省时省电. | ||||||||
| MOULD TEMPERATUER CONTROLLE SERIES | ||||||||
| FEATURES: | 1. Installed with two controller system,able to control to the front and back mould | |||||||
| which has different tem perature repuirement. | ||||||||
| 2. You can choose water or hot kerosine,or choose water and hot kerosine at the same | ||||||||
| time as required as the heat medium. | ||||||||
| 3. Optiional pid temperature controllers are used for accurate control of temperature | ||||||||
| within+1℃. | ||||||||
| 4. Two step heating selectof gives rapid temperature increase control when repuired | ||||||||
| thus saning time & power l.e.start Up in Mornings. | ||||||||
| 两机一体模温机规格表:Specifications of mould temperatuer controlle series | ||||||||
型号 | 泵浦功率 | 加热功率 | 泵流量L/MIN | 泵浦压力PUMPPRESSURE | 出入管径 | 外形尺寸 | 重量 | |
TMC-44/W | 0.5HP/0.5HP | 4.5KW/4.5KW | 40/40 | 2.2 | 3/8"*2/3/8"*2 | 660*350*550 | 50 | |
TMC-46/W | 0.5HP/0.5HP | 4.5KW/6KW | 40/40 | 2.2 | 3/8"*2/3/8"*2 | 600*350*550 | 65 | |
TMC-49/W | 0.5HP/0.5HP | 4.5KW/9KW | 40/40 | 2.2 | 3/8"*2/3/8"*4 | 600*350*550 | 65 | |
TMC-66/W | 0.5HP/0.5HP | 6KW/6KW | 40/40 | 2.2 | 3/8"*2/3/8"*2 | 650*350*600 | 75 | |
TMC-69/W | 0.5HP/0.5HP | 6KW/9KW | 40/40 | 2.2 | 3/8"*2/3/8"*4 | 650*350*600 | 75 | |
TMC-99/W | 0.5HP/1HP | 9KW/9KW | 40/40 | 2.2 | 3/8"*4/3/8"*4 | 650*350*600 | 75 | |
TMC-612/W | 0.5HP/1HP | 6KW/6KW*2 | 40/80 | 2.2 | 3/8"*2/3/8"*4 | 720*400*650 | 90 | |
TMC-912/W | 0.5HP/1HP | 9KW/6KW*2 | 40/80 | 2.2 | 3/8"*4/3/8"*4 | 720*400*650 | 90 | |
| 产品规格若有改变，恕不另行通知。 We reserve the right to change specif ations without prior notic | ||||||||
| 品牌 | 统益牌 | 型号 | TMC-66/w |
| 产品别名 | 两机一体模温机，双温机 | 产品用途 | 双段恒温，两段式加热 |
| 电动机功率 | 2.2（KW） | 外形尺寸 | 650*350*600（mm） |
| 重量 | 75（kg） | 类别 | 模温机 |
